Union Territory Tax Notifications (Rate)

UGST Notification rate 06/2022

 

Title Seeks to amend notification No. 1/2017- Union Territory Tax (Rate)
Number 06/2022
Date 13-07-2022
PDF Download

G.S.R       (E).- In exercise of the powers conferred by sub-section (1) of section 7 of the Union Territory Goods and Services Tax Act, 2017 (14 of 2017), the Central Government, on the recommendations of the Council, hereby makes the following further amendments in the notification of the Government of India in the Ministry of Finance (Department of Revenue), No.1/2017-Union Territory Tax (Rate), dated the 28th June, 2017, published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), vide number G.S.R. 710(E)., dated the 28th June, 2017, namely:-

1. In the said notification, –

A. in the opening paragraph,

(i) in clause (v), the word “and” shall be omitted;

(ii) in clause (vi), after the word and figures “Schedule VI”, the figure and word “, and” shall be inserted;

(iii) after clause (vi), the following clause shall be inserted, namely:-

“(vii) 0.75 per cent. in respect of goods specified in Schedule VII”.

 

B. in Schedule I – 2.5%,

(i) against S. Nos. 1 and 2, in column (3), for the portion beginning with the words “and put up in” and ending with the words and bracket “as in the ANNEXURE]”, the words “, pre-packaged and labelled” shall be substituted;

(ii) after No. 9 and the entries relating thereto, following S. No. and entries shall be inserted, namely: –

“9A 0403 Curd, Lassi, Butter milk, pre-packaged and labelled”;

(iii) against Nos. 11 and 13, in column (3), for the portion beginning with the words “put up in” and ending with the words and bracket “as in the ANNEXURE]”, the words “, pre-packaged and labelled” shall be substituted;

(iv) against No. 16, in column (3), for the portion beginning with the words “and put up in” and ending with the words “as in the ANNEXURE”, the words “, pre-packaged and labelled” shall be substituted;

(v) against S. No. 25, in column (3), for the portion beginning with the words “put up in” and ending with the words and bracket “as in the ANNEXURE]”, the words “, pre-packaged and labelled” shall be substituted;

(vi) against S. No. 26, in column (3), for the portion beginning with the words “put up in” and ending with the words “as in the ANNEXURE”, the words “pre-packaged and labelled” shall be substituted;

(vii) against S. No. 30, in column (3), for the portion beginning with the words “put up in” and ending with the words “as in the ANNEXURE”, the words “, pre-packaged and labelled” shall be substituted;

(viii) against S. Nos. 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 58 and 59, in column (3), for the portion beginning with the words “put up in” and ending with the words and bracket “as in the ANNEXURE]”, the words “, pre-packaged and labelled” shall be substituted;

(ix) after No. 91 and the entries relating thereto, following S. No. and entries shall be inserted, namely: –

“91A 1701

or 1702

Jaggery of all types including Cane Jaggery (gur), Palmyra Jaggery, pre-packaged and labelled; Khandsari Sugar, pre-packaged and labelled”;

(x) after No. 98 and the entries relating thereto, following S. No. and entries shall be inserted, namely: –

“98A 1904 Puffed rice, commonly known as Muri, flattened or beaten rice, commonly known as Chira, parched rice, commonly known as khoi, parched paddy or rice coated with sugar or gur, commonly known as Murki, pre-packaged and labelled”;

(xi) against No. 101A, in column (3), for the portion beginning with the words “other than those put up in” and ending with the words and bracket “as in the ANNEXURE]”, the words “, other than those pre-packaged and labelled” shall be substituted;

(xii) No. 163 and the entries relating thereto shall be omitted;

(xiii) after No. 181A and the entries relating thereto, following S. No. and entries shall be inserted, namely: –

“181B 3006 Ostomy appliances including pouch or flange, stoma adhesive paste, barrier cream, irrigator kit, sleeves, belt, micro-pore tapes”;

(xiv) against S. No. 182, in column (3), for the words “put up in unit containers and bearing a brand name”, the words “, pre-packaged and ” shall be substituted;

(xv) Nos. 197A, 197B, 197C, 197D and 197E and entries relating thereto shall be omitted;

(xvi) against No. 215, in column (3), for the words “put up in unit container and bearing a brand name”, the words “, pre-packaged and labelled” shall be substituted;

(xvii) Nos. 230, 232, 233, 234A and 234C and entries relating thereto shall be omitted;

(xviii) after No. 255 and entries relating thereto, the following S. No. and entries shall be inserted, namely: –

“255A 9021 Orthopaedic appliances, such as crutches, surgical belts, and trusses; Splints and other fracture appliances; artificial parts of the body; other appliances which are worn or carried, or implanted in the body, to compensate for a defect or disability; intraocular lens [other than hearing aids]”;

(xix) after No. 264 and entries relating thereto, in List No. 3, in item (B), the sub-item (1) and the entries relating thereto shall be omitted;

 

C. in Schedule II – 6%, –

(i) against No. 16, in column (3), after the word “guavas”, the words and brackets “, mangoes (other than mangoes sliced, dried)” shall be inserted;

(ii) against S. No. 41A, in column (3), for the portion beginning with the words “put up in” and ending with the words and bracket “in the ANNEXURE]”, the words “, pre-packaged and labelled” shall be substituted;

(iii) against No. 46, in column (3), for the portion beginning with the words “put up in” and ending with the words and bracket “in the ANNEXURE]”, the words “, pre-packaged and labelled” shall be substituted;

(iv) against No. 65, in column (3), after the word “contraceptives”, the words “and Ostomy appliances” shall be inserted;

(v) No.70 and the entries relating thereto shall be omitted;

(vi) after No. 85A and the entries relating thereto, the following S. No. and entries shall be inserted, namely: –

“85B 4107 Leather further prepared after tanning or crusting, including parchment-dressed leather, of bovine (including buffalo) or equine animals, without hair on, whether or not split, other than leather of heading 4114
85C 4112 Leather further prepared after tanning or crusting, including parchment-dressed leather, of sheep or lamb, without wool on, whether or not split, other than leather of heading 4114
85D 4113 Leather further prepared after tanning or crusting, including parchment-dressed leather, of other animals, without wool or hair on, whether or not split, other than leather of heading 4114
85E 4114 Chamois (including combination chamois) leather; patent leather and patent laminated leather; metallised leather
85F 4115 Composition leather with a basis of leather or leather fibre, in slabs, sheets or strip, whether or not in rolls; parings and other waste of leather or of composition leather, not suitable for the manufacture of leather articles; leather dust, powder and flour”;

(vii) No.120 and the entries relating thereto shall be omitted;

(viii) after S. 125 and the entries relating thereto, the following S. No. and entries shall be inserted, namely :-

“125A 4905 Maps and hydrographic or similar charts of all kinds, including atlases, wall maps, topographical plans and globes, printed”;

(ix) against No. 176B, for the entry in column (3), the entry “Fly ash bricks; Fly ash aggregates; Fly ash blocks” shall be substituted;

(x) No. 187, 188, 189, 192 and 193 and the entries relating thereto shall be omitted;

(xi) after No. 194 and the entries relating thereto, the following S. No. and entries shall be inserted, namely: –

“194A 8419 12 Solar water heater and system”;

(xii) No. 195 and the entries relating thereto shall be omitted;

(xiii) against No. 197, in column (3), for the words and figures “machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading 8437; parts [8433 90 00]”, the words “parts thereof” shall be substituted;

(xiv) Nos. 198, 205, 217, 221, 226 and 227 and the entries relating thereto shall be omitted;

 

D. in Schedule III – 9%, –

(i) against S. No. 30A, for the entry in column (3), the entry “Tar distilled from coal, from lignite or from peat and other mineral tars, whether or not dehydrated or partially distilled, including reconstituted tars” shall be substituted;

(ii) after No. 54B and entries relating thereto, the following S. No. and entries shall be inserted, namely: –

“54C 3215 All Goods, including printing ink, writing or drawing ink and other inks, whether or not concentrated or solid, fountain pen ink, ball pen ink”;

(iii) against S. No. 148, in column (3), the brackets and words “[Other than aseptic packaging paper]” shall be omitted;

(iv) against S. No. 157B, in column (3), after the word and bracket “Scrips)”, the figures and words “; Cheques, loose or in book form” shall be inserted;

(v) against S. No. 182D, in column (3), for the brackets, words and figures “[other than fly ash bricks, fly ash blocks, fly ash aggregate with 90 percent or more fly ash content]”, the brackets and words “[other than Fly ash bricks; Fly ash aggregates; Fly ash blocks]” shall be substituted;

(vi) No. 301A shall be re-numbered as S. No. 301AA, and before S. No. 301AA as so re-numbered, the following S. No. and entries shall be inserted, namely:

“301A 8211 Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades therefor”;

(vii) against No. 302A, in column (3), the brackets and words “[other than paper knives, pencil sharpeners and blades therefor]” shall be omitted;

(viii) after No. 302A and entries relating thereto, the following S. No. and entries shall be inserted, namely: –

“302B 8215 Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware”;

(ix) against No. 317A, for the entry in column (3), the entry “(a) Concrete pumps [8413 40 00]; (b) other rotary positive displacement pumps [8413 60]; (c) Power driven pumps primarily designed for handling water, namely, centrifugal pumps (horizontal and vertical), deep tube-well turbine pumps, submersible pumps, axial flow and mixed flow vertical pumps” shall be substituted;

(x) after No. 317B and the entries relating thereto, the following S. No. and entries shall be inserted, namely:-

“317C 8414 20 10 Bicycle pumps
317D 8414 90 12 Parts of air or vacuum pumps and compressors of bicycle pumps”;

(xi) after No. 328 and the entries relating thereto, the following S. No. and entries shall be inserted, namely: –

“328A 8433 Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce, other than machinery of heading 8437; parts thereof [8433 90 00]
328B 8434 Milking machines and dairy machinery”;

(xii) after No. 329 and the entries relating thereto, the following S. No. and entries shall be inserted, namely: –

“329A 8437 Machines for cleaning, sorting or grading, seed, grain or dried leguminous vegetables; machinery used in milling industry or for the working of cereals or dried leguminous vegetables other than farm type machinery and parts thereof”;

(xiii) after No. 371 and the entries relating thereto, the following S. No. and entries shall be inserted, namely: –

“371A 84 or

85

E-waste

 

Explanation.- For the purpose of this entry, E-waste means electrical and electronic equipment listed in Schedule I of the E-Waste (Management) Rules, 2016 (published in the Gazette of India vide G.S.R. 338 (E) dated the 23rd March, 2016), whole or in part if discarded as waste by the consumer or bulk consumer”;

(xiv) against S. No. 376AC, in column (3), the brackets and words “[other than wet grinder consisting of stone as a grinder]” shall be omitted;

(xv) against No. 390, in column (3), the brackets, words and letters “[other than Light-Emitting Diode (LED) Light Sources]” shall be omitted;

(xvi) after No. 406 and the entries relating thereto, the following S. No. and entries shall be inserted, namely: –

“406A 8807 Parts of goods of heading 8801”;

(xvii) against No. 413, for the entry in column (3), the entry “Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers), not specified or included elsewhere in this chapter” shall be substituted;

(xviii) against S. No. 438A, in column (3), the letters, words, and brackets “LED lights or fixtures including LED lamps; LED (light emitting diode) driver and MCPCB (Metal Core Printed Circuit Board)” shall be omitted;

 

E. in Schedule VI – 0.125%,

(i) against S. No. 1, for the entry in column (3), the entry “Rough diamonds or simply sawn diamonds, industrial or non-industrial” shall be substituted;

(ii) against No. 3, for the entry in column (3), the entry “Synthetic or reconstructed precious or semiprecious stones [other than diamonds], whether or not worked or graded but not strung, mounted or set; ungraded synthetic or reconstructed precious or semiprecious stones [other than diamonds], temporarily strung for convenience of transport; synthetic or reconstructed diamonds, unworked or simply sawn or roughly shaped” shall be substituted;

 

F. after Schedule VI and before Explanation, following entries shall be inserted, namely:-

“Schedule VII – 75%

S.No. Chapter                       / Heading / Sub- heading / Tariff item Description of Goods
(1) (2) (3)
1. 7102 Goods other than those specified against S. No. 1 in Schedule VI
2. 7104 Goods other than those specified against S. No. 3 in Schedule VI”;

 

G. after the Schedule VII, in the Explanation, for clause (ii) and the entries relating thereto, the following clause shall be substituted, namely:-

‘(ii) The expression ‘pre-packaged and labelled’ means a ‘pre-packaged commodity’ as defined in clause (l) of section 2 of the Legal Metrology Act, 2009 (1 of 2010) where, the package in which the commodity is pre-packed or a label securely affixed thereto is required to bear the declarations under the provisions of the Legal Metrology Act, 2009 (1 of 2010) and the rules made thereunder.’.

 

2. This notification shall come into force on the 18th day of July,